Distilleries

Accessory set with pump for stailess-steel stills up to 10 literes

This set includes everything you need to ferment 20 liters of mash or to be able to distil immediately and seriously with our 2 liter stainless steel stills.
We would like to point out to our German customers that the fermented mash may not be distilled by private individuals in Germany.

1. 20 liter plastic bucket as mash or cooling water reservoir.

   1. Fermentation attachment for plugging into the lid with a sealed hole.

   2. Outlet tap for mash extraction.

2. Powerful 230 volt cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 liters.

3. Various PVC hoses of 2m each, including 2 hoses with hose screw connections for the still cooler. In addition, 3 hoses of different thicknesses for different applications.

4. Plastic tap for cooling water regulation, suitable for the walking flow cooler.

5. Graduated 100 ml measuring cylinder with foot to be able to safely collect and measure the distillate.

6. Cleaning brush.

7. Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed. During fermentation, it can be used to measure the fermentation temperature.

8. A roll of Teflon tape for sealing, e.g. if a seal becomes defective during distillation.

Accessory set with pump for stailess-steel stills up to 10 literes

This set includes everything you need to be able to distil immediately and seriously with our stainless stills up to about 10 liters. 

1. 20 liter plastic bucket with lid as a cooling water reservoir.

2. Powerful 230 volt cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 liters.

3. Various PVC hoses of 2m each, including 2 hoses with hose screw connections for the still cooler. In addition, 3 hoses of different thicknesses for different applications.

4. Plastic tap for cooling water regulation, suitable for the walking flow cooler.

5. Graduated 100 ml measuring cylinder with foot to be able to safely collect and measure the distillate.

6. Cleaning brush.

7. Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed.

8. A roll of Teflon tape for sealing, e.g. if a seal becomes defective during distillation.

This set includes everything you need to be able to distil immediately and seriously with our stills up to about 20 litres. The pump is powerful enough to safely supply even all mini nestling in the 3 to 20 litres size with cooling water. First and foremost, the set contains a functionally-sized cooling system for the still, but there are also other accessories for cleaning and sealing. In addition, when purchasing a stainless steel still together with the accessory set the right hose fittings for our coolers are there.
The set includes a 10-litres plastic tub as a cooling water depot (the water must be replaced several times in larger distilleries), plus a 230-volt cooling water pump, plus several meters of food-grade tubing in four different sizes so you can safely connect any distillery. The hoses can be partially inserted into each other and can thus also bridge different connections and adapters. In addition, a cleaning brush, a swim thermometer, a roll of Teflon tape for sealing the still and a 100 ml graduated cylinder to the distillate safely collecting and measuring.

Accessory set with pump for stailess-steel stills up to 2 literes

This set includes everything you need to be able to distil immediately and seriously with our stainless stills up to about 10 liters. 

1. 20 liter plastic bucket with lid as a cooling water reservoir.

2. Powerful 230 volt cooling water pump, sufficient for all our stainless steel stills up to 2 liters.

3. Various PVC hoses of 2m each, including 2 hoses with hose screw connections for the still cooler. In addition, 2 hoses of different thicknesses for different applications.

4. Plastic tap for cooling water regulation, suitable for the walking flow cooler.

5. Graduated 100 ml measuring cylinder with foot to be able to safely collect and measure the distillate.

6. Cleaning brush.

7. Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed.

8. A roll of Teflon tape for sealing, e.g. if a seal becomes defective during distillation.

Accessory set with pump for miniature copper stills up to 3 litres - Not suitable for our stainless steel stills

This set includes everything you need to be able to distil immediately and seriously with our stills up to about 3 litres. The pump is powerful enough to safely supply even all mini nestling in the range 0,5 to 3 litres size (as they may be used legally in Austria and from 2018 Germany or Switzerland) with cooling water. First and foremost, the set contains a functionally-sized cooling system for the still, but there are also other accessories for cleaning and sealing. In addition, when purchasing a stainless steel still together with the accessory set the right hose fittings for our coolers are there.
The set includes a 10-liter plastic tub as a cooling water depot (the water must be replaced several times in larger distilleries), plus a 230-volt cooling water pump, plus several meters of food-grade tubing in four different sizes so you can safely connect any distillery. The hoses can be partially inserted into each other and can thus also bridge different connections and adapters. In addition, a cleaning brush, a swim thermometer, a roll of Teflon tape for sealing the still and a 100 ml graduated cylinder to the distillate safely collecting and measuring.

Set of Textures Hosepipe for Distillery
2 Hosepipes , 3 m long:

1/2" - 3/4" und 1/2" - 1/2"

Two times 3 m long crease resilent PVC-Textures-Hosepipe with fitting screw-connection using between cooler of distillery (1/2") and your home connection.

Set of Textures Hosepipe for Distillery
2 Hosepipes , 2m long:

1/2" - 3/4" und 1/2" - 1/2"

Two times 2 m long crease resilent PVC-Textures-Hosepipe with fitting screw-connection using between cooler of distillery (1/2") and your home connection.