Accessory set with pump for stailess-steel stills up to 20 literes
This set includes everything you need to ferment 20 liters of mash or to be able to distil immediately and seriously with our 2 liter stainless steel stills.
We would like to point out to our German customers that the fermented mash may not be distilled by private individuals in Germany.
-
20 liter plastic bucket as mash or cooling water reservoir.
-
Fermentation attachment for plugging into the lid with a sealed hole.
-
Outlet tap for mash extraction.
-
-
Powerful 230 volt cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 liters.
-
Various 2m PVC hoses, including 2 hoses with screw connections for the distillation cooler:
The first hose goes from the pump to the 1/2‘ connection of the cooler near the distillate outlet at the bottom. The second hose is connected to the 1/2’ connection for the hot waste water at the top of the cooler. The other end with the 3/4‘ connection is routed to where the waste water is to go, i.e. back into the bucket when the pump is in circulation. The 3/4’ connection is now new – previously this end remained open. The reason for this change is that you can replace the hoses if you have running water nearby. Most house connections have a 3/4’ thread, so you can connect the 2nd hose from the running water supply to the water inlet of the cooler. -
Plastic tap for cooling water regulation, suitable for the walking flow cooler.
-
Graduated 100 ml measuring cylinder with foot to be able to safely collect and measure the distillate.
-
Cleaning brush.
-
Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed. During fermentation, it can be used to measure the fermentation temperature.
-
A roll of Teflon tape for sealing, e.g. if a seal becomes defective during distillation.