Accessories

separatory funnel

Essential oil accessories

Measuring flask, 1000 ml, made of laboratory glass, with plastic stopper

Measuring flask, 1000 ml, made of laboratory glass, with plastic stopper

This unused piston is made of heat-resistant laboratory glass and comes from stocks of the former GDR. It is particularly suitable for the collection of hydrolates in the distillation. It has exactly the size of the maximum removal quantity of the message-free 2-liter stills.

EUR 25,00
incl. 19% tax excl. Shipping costs
accessory-set

Accessory set with pump for miniature copper stills up to 3 litres - Not suitable for our stainless steel stills


This set includes everything you need to be able to distil immediately and seriously with our stills up to about 3 litres. The pump is powerful enough to safely supply even all mini nestling in the range 0,5 to 3 litres size (as they may be used legally in Austria and from 2018 Germany or Switzerland) with cooling water. First and foremost, the set contains a functionally-sized cooling system for the still, but there are also other accessories for cleaning and sealing. In addition, when purchasing a stainless steel still together with the accessory set the right hose fittings for our coolers are there.
The set includes a 10-liter plastic tub as a cooling water depot (the water must be replaced several times in larger distilleries), plus a 230-volt cooling water pump, plus several meters of food-grade tubing in four different sizes so you can safely connect any distillery. The hoses can be partially inserted into each other and can thus also bridge different connections and adapters. In addition, a cleaning brush, a swim thermometer, a roll of Teflon tape for sealing the still and a 100 ml graduated cylinder to the distillate safely collecting and measuring.

EUR 47,00
incl. 19% tax excl. Shipping costs
accessory-set

Cooling set with pump for our stainless steel distillers up to 20 litres

This set contains everything you need to start serious distillation immediately, even with our unobtrusive 2-litre stainless steel distillers.

Set accessories

  1. 20 litre plastic tub as cooling water reservoir
  2. Powerful 230V cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 litres.
  3. Various 2m PVC hoses, 2 of which have hose fittings for the still cooler:
The first hose goes from the pump to the 1/2‘ connection of the condenser near the distillate outlet at the bottom. The second hose is connected to the 1/2’ connection for the hot waste water at the top of the condenser. The other end with the 3/4‘ connection is led to where the waste water should go, so back into the bucket when pumping. The 3/4’ connection is now new - previously this end remained open. The reason for this innovation is that you can replace the hoses if you have running water nearby. Most house connections have a 3/4’ thread, so you can connect the 2nd hose from the running water supply to the water inlet of the cooler. The 1st hose is then connected to the top of the cooler and the hot waste water now comes out of the black pump screw nipple. The pump is not needed for this cooling variant. So you now have two options for cooling. In addition to these two hoses, there are three hoses of different strengths for various applications.
  1. Plastic tap for cooling water control, suitable for the counterflow cooler.
  2. Scaled 100 ml measuring cylinder with foot to safely collect and measure the distillate.
  3. Cleaning brush.
  4. Floating thermometer for cooling water control if the hot waste water is allowed to flow back into the bucket. From 40° C, the water should either be cooled with ice or replaced.
  5. A roll of Teflon tape for sealing, e.g. if a seal fails during distillation.
EUR 62,00
incl. 19% tax excl. Shipping costs
Cooling-Water-Hosepipes

Set of Textures Hosepipe for Distillery
2 Hosepipes , 2m long:

1/2" - 3/4" und 1/2" - 1/2"

Two times 2 m long crease resilent PVC-Textures-Hosepipe with fitting screw-connection using between cooler of distillery (1/2") and your home connection.

EUR 25,00
incl. 19% tax excl. Shipping costs
Lavender Blossoms

Blue lavender blossoms for steam distillation

Lavender is a member of the mint family and is often used for perfume extraction.
You are purchasing a product that is ideally suited for the extraction of essential oils and fragrant hydrolates. The aroma-protected and light-protected packaging ensures a consistently excellent quality for a long time.

Simply fill the flowers in the plant / drug room. The flowers must not be pressed. Close your system and distil at medium to high heat setting. For drug containers height> diameter, you can set the heating level higher. Find out the ideal distillation speed for your system yourself. The lavender flowers offered here have a high oil yield.

EUR 15,50
incl. 19% tax excl. Shipping costs
separating funnel

Oil separator / separating funnel 100 ml - according to Squibb

Oil separator made from DURAN BOROSILICATE GLASS 3.3 - laboratory quality. The optimal separating funnel for the clean separation of essential oil and hydrosol when distilling as well as other liquids with different weights (e.g. oil and water)

A separating funnel is an indispensable aid for the distillation of essential oils with many other uses in the laboratory and at home. This oil separator is resistant to most acids and heat-resistant even above 100 ° C.

Best quality so that you can enjoy your work for a long time.

DURAN BOROSILICATE GLASS 3.3
With PTFE laboratory stopcock (tap)

ground glass joint NS 29/32

EUR 69,00
incl. 19% tax excl. Shipping costs
separating funnel

Oil separator / separating funnel 500 ml -graduated - according to Squibb
Oil separator made from DURAN BOROSILICATE GLASS 3.3 - laboratory quality. The optimal separating funnel for the clean separation of essential oil and hydrosol when distilling as well as other liquids with different weights (e.g. oil and water)

A separating funnel is an indispensable aid for the distillation of essential oils with many other uses in the laboratory and at home. This oil separator is resistant to most acids and heat-resistant even above 100 ° C.

Best quality so that you can enjoy your work for a long time.

 

EUR 79,00
incl. 19% tax excl. Shipping costs
1 to 8 (from a total of 9)