Stainless Steel Stills

Stainless-Steel-Still

Stainless steel distillation equipment

Here we list all stainless steel distillers, regardless of whether they are intended for alcohol distillation or steam distillation for the production of essential oils. With our distillers, you can distil anything, but we have models that are optimised for alcohol and others for essential oils. If you want to do both and are allowed to, choose an all-rounder.


GPSR information and manufacturer's instructions: 

The following information applies to all our stainless steel distillation devices

Hazard warning: When used properly, our stainless steel distillers do not pose any particular hazards. All our devices are designed so that high pressures cannot build up. However, you should be aware that all parts become hot during distillation. . We therefore strongly recommend wearing protective gloves and goggles during distillation, refilling and dismantling. When using gas stoves, only devices with a safety ignition must be used. Gas appliances used indoors must be approved for indoor use.

Please be careful and observe the downloadable operating instructions.

Manufacturer's address:

herstellerangebote.de - Zerbster Str. 15 - 39279 Leitzkau - Germany, email address: support(ad)herstellerangebote.de

DESTILLIERMEISTER JUMBO W42

DESTILLIERMEISTER JUNIOR-WD42

42 l stainless steel still with pressurized water bath, 2 columns, dephlegmator, high-performance cooling and 10,5 kW gas-cooker for the production of brandy

High Quality:

  • Solid thick-walled boiler for the water bath

  • with pressure measurement and safety valves,

  • made of 18/10 stainless steel with three-layered thermo bottom

Equipment and dimensions

  • Water bath boiler with safety system for the pressurized water bath: 25 liters

  • Mash-water boilers: 20.5 Litres,

  • 2 Columns / combustion-chamber extensions: 12 Litres,

  • Dephlegmator,

  • Inner Diameter 32 cm,

  • 10,5 kW gas-cooker with ignition protection

  • Total height approx. 170 cm.

  • Powerful counterflow cooler with 6 m jacket length. In this cooler, a thinner pipe (core) passes through a jacket pipe. Through the soul flows the distillate. Between soul and coat cooling water is passed in countercurrent. Due to the spiral-shaped water flow, the flow between soul and mantle is turbulent even at low flow velocities. This causes effective heat transfer from the distillate to the cooling water. Because of this and because of the comfortable length of the radiator, only moderate cooling water is needed.

EUR 2.199,00
incl. 19% tax excl. Shipping costs
17 to 18 (from a total of 18)