Oil Separation Apparatus 100 ml separating funnel with PTFE stopcock / 500 ml Erlenmeyer flask collection vessel - Boro 3.3 - graduated -
Simultaneous distillation and separation of essential oil
BOROSILICATE GLASS 3.3 - Laboratory quality.
The ideal separation apparatus for the clean separation of essential oil and hydrosol during distillation, as well as other liquids with different densities (e.g., oil and water).
Accessories
-
100 ml separating funnel with a wide opening, allowing the hydrosol to flow directly into it during distillation.
-
PTFE stopcock for regulating the flow. It should be positioned crosswise—i.e., closed—at the start of distillation. Adjust the flow so that, once the distillate reaches a level of your choosing in the separating funnel (e.g., 50 ml to 60 ml for up to 6 liters of plant volume in the still), it flows out in such a way that the level remains constant. If the plant chamber volume exceeds 5 liters, the hydrosol in flask 4 may need to be decanted (depending on the material being distilled). For a plant chamber volume of 4 to 5 liters, a hydrosol yield of 1 liter is a good guideline for most plants to ensure high-quality hydrosol. There are some exceptions (e.g., fennel seeds) where the volume of high-quality hydrosol can be as much as 3 liters. An indicator of good hydrosol quality is the pH value, which should ideally be below 5. Whether a pH of 6 is still acceptable is best determined by your own sense of smell.
-
Stopper for the collection flask with a feed tube. In the newly delivered kits, this stopper is replaced with a rubber stopper, as it is more stable. Pressure equalization must be established here so that the hydrosol can flow out without bubbles. To do this, carve a notch from top to bottom into the rim of the stopper. This is sufficient for pressure equalization.
-
Erlenmeyer flask for collecting the hydrosol.
-
Sealing stopper, designed to fit the separating funnel. This is not needed during distillation.
Top quality so you can enjoy your work for a long time.