Cooler and Heatexchanger

Stainless steel snake cooler / heat exchanger for various applications

Stainless steel 1.4521, double stabilization with titanium / niobium, resistant to intergranular corrosion

• 22 x 1.2 mm, therefore high heat exchange performance (cooling capacity)

• Spiral height: approx. 22 cm at a length of 2.5 m,

• spiral diameter: approx. 23 cm,

• 2 m to 6 m stretched length.

 other dimensions than custom made by effort.
 
The cooling coils are manufactured to order and payment in the specifications specified by the customer. A return is excluded.
Please specify the desired length. If not specified, the maximum length of the selected variant is delivered.
 
The picture shows a 2.5 m long snake

Stainless steel snake cooler / heat exchanger for various applications

Stainless steel 1.4521, double stabilization with titanium / niobium, resistant to intergranular corrosion

• 15 x 1.0 mm, therefore high heat exchange performance (cooling capacity)

• Spiral height: approx. 18 cm at a length of 2.5 m,

• spiral diameter: approx. 16 cm,

• 2 m to 6 m stretched length.

 other dimensions than custom made by effort.
 
The cooling coils are manufactured to order and payment in the specifications specified by the customer. A return is excluded.
Please specify the desired length. If not specified, the maximum length of the selected variant is delivered.
 
The picture shows a 2.5 m long snake

• Aisi 444 (1.4521) stainless steel.
  Unsuitable for swimming pools with chlorine water. Select article made from AISI 316 instead of it.
• max. Length 6 m before bending.
• Hose: 4 x 1/2".

Beer-Wort-Cooler/ Mash-Heater for Homebrewer / Heat-Exchanger

• Spooled stainless-steel pipe 15 x 1,0 mm,
• strung-out-length 7 m (22.97 feet),
• helix-diameter 0.30 m (0.98 feet),
• helix-height 0.35 m (1.15 feet),
• complete-height 0.70 m (2.3 feet),
• waterpipe-connection 3/4"

Helix-diameter ± 0.1 m (0.33 feet)
Helix-height ± 0.2 m (0.66 feet)

• Aisi 316 (1.4401) stainless steel.
  Unsuitable for swimming pools with chlorine water. Select article made from AISI 316 instead of it.
• max. Length 6 m before bending.
• Hose: 4 x 1/2".

Cooling coils made of the material 1.4401 Stainless steel 1.4401

Cooling coils made of the material 1.4401 Stainless steel 1.4401 is an austenitic material. The tubes of our offer come exclusively from German production and are DVGW tested and approved. This material has a very high corrosion resistance and is resistant to most chemicals. In general, this material belongs to the V4A stainless