Private Distilleries

Accessory set with pump for stailess-steel stills up to 10 literes

This set includes everything you need to be able to distil immediately and seriously with our stainless stills up to about 10 liters. 

1. 20 liter plastic bucket with lid as a cooling water reservoir.

2. Powerful 230 volt cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 liters.

3. Various PVC hoses of 2m each, including 2 hoses with hose screw connections for the still cooler. In addition, 3 hoses of different thicknesses for different applications.

4. Plastic tap for cooling water regulation, suitable for the walking flow cooler.

5. Graduated 100 ml measuring cylinder with foot to be able to safely collect and measure the distillate.

6. Cleaning brush.

7. Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed.

8. A roll of Teflon tape for sealing, e.g. if a seal becomes defective during distillation.

"CopperGarden®" 0.5-liters capacity column still

Accessory set with pump for stailess-steel stills up to 10 literes

This set includes everything you need to ferment 20 liters of mash or to be able to distil immediately and seriously with our 2 liter stainless steel stills.
We would like to point out to our German customers that the fermented mash may not be distilled by private individuals in Germany.

1. 20 liter plastic bucket as mash or cooling water reservoir.

   1. Fermentation attachment for plugging into the lid with a sealed hole.

   2. Outlet tap for mash extraction.

2. Powerful 230 volt cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 liters.

3. Various PVC hoses of 2m each, including 2 hoses with hose screw connections for the still cooler. In addition, 3 hoses of different thicknesses for different applications.

4. Plastic tap for cooling water regulation, suitable for the walking flow cooler.

5. Graduated 100 ml measuring cylinder with foot to be able to safely collect and measure the distillate.

6. Cleaning brush.

7. Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed. During fermentation, it can be used to measure the fermentation temperature.

8. A roll of Teflon tape for sealing, e.g. if a seal becomes defective during distillation.

Accessory set with pump for stailess-steel stills up to 10 literes

This set includes everything you need to ferment 30 liters of mash or to be able to distil immediately and seriously with our 2 liter stainless steel stills.
We would like to point out to our German customers that the fermented mash may not be distilled by private individuals in Germany.

1. 20 liter plastic bucket as mash or cooling water reservoir.

   1. Fermentation attachment for plugging into the lid with a sealed hole.

   2. Outlet tap for mash extraction.

2. Powerful 230 volt cooling water pump with accessories for different hose diameters, sufficient for all our stainless steel stills up to 10 liters.

3. Various PVC hoses of 2m each, including 2 hoses with hose screw connections for the still cooler. In addition, 3 hoses of different thicknesses for different applications.

4. Plastic tap for cooling water regulation, suitable for the walking flow cooler.

5. Graduated 100 ml measuring cylinder with foot to be able to safely collect and measure the distillate.

6. Cleaning brush.

7. Floating thermometer for checking the cooling water if you let the hot waste water run back into the bucket. Above 40°C, the water should either be cooled with ice or changed. During fermentation, it can be used to measure the fermentation temperature.

8. A roll of Teflon tape for sealing, e.g. if a seal becomes defective during distillation.

"CopperGarden®" Whisky still 0,5 L

Beautiful handforged Whisky still modelled after the traditional Scottish Whiskey distilleries with the typical high hat. A dream has come true, because now it is finally possible to use a Whisky still in hobby size.

With this latest model from 2014 handcrafted in our  "CopperGarden®" forge, we can finally offer an elegant Whisky still for hobby distillers .

"CopperGarden" still 0,5L "Charentais"

For the first time a genuine Charentais has been successfully miniaturized and at the same time has retained the full function. This premium copper still can distil in two steps: first, the contents of the boiler are slowly distilled, namely through the second boiler in the middle – and after that the heated contents can be poured out of the middle boiler.  

 The Charentais distils slowly and full of aroma! This type of still is traditionally used in the Charente in France (around the city of Cognac) for distilling the famous and unique Cognac.
 A decorative, and at the same time functional masterpiece – especially for lovers of brandy and Cognac.